I find old electrical plastic tape, becomes gummy. But since you have been doing it for years, it sounds like you periodically recover with new. I like heat shrink. Regards, John M. Ross Windsor, Nova Scotia. jrpiano@win.eastlink.ca ----- Original Message ----- From: "Dick Beaton" <rbeaton@initco.net> To: <pianotech@ptg.org> Sent: Friday, March 01, 2002 7:01 PM Subject: Re: Clean piano > Here is another good way... > > Cover the steel with black plastic electrical tape on both sides. Been doing this for years and works fine. > Dick RPT MT > ----- Original Message ----- > From: "Dave Nereson" <dnereson@dimensional.com> > To: <pianotech@ptg.org> > Sent: Friday, March 01, 2002 1:14 AM > Subject: Re: Clean piano > > > > > > ----- Original Message ----- > > From: Dave Nereson <dnereson@dimensional.com> > > To: <pianotech@ptg.org> > > Sent: Friday, March 01, 2002 12:52 AM > > Subject: Re: Clean piano > > > > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC