Clean piano

[John Ross]

To stop the scratching of the soundboard steel, just cover it with heat
shrink.
Regards,
John M. Ross
Windsor, Nova Scotia.
jrpiano@win.eastlink.ca
----- Original Message -----
From: "Farrell" <mfarrel2@tampabay.rr.com>
To: <pianotech@ptg.org>
Sent: Friday, March 01, 2002 8:39 AM
Subject: Re: Clean piano


> "but less likely to scratch the board  -- it still will, but not as easily
if you're--David Nereson, RPT, Denver"
>
> Well, I'm only Terry Farrell, Associate Member PTG, Tampa, but I think it
is a good idea and I will try it also. It might even work for me. Boy, oh,
boy, some people with their attitudes!  ;-)
>
> Terry Farrell
>
> ----- Original Message -----
> From: "Dave Nereson" <dnereson@dimensional.com>
> To: <pianotech@ptg.org>
> Sent: Friday, March 01, 2002 2:52 AM
> Subject: Re: Clean piano
>
>
> >
> > ----- Original Message -----
> > From: Farrell <mfarrel2@tampabay.rr.com>
> > To: <pianotech@ptg.org>
> > Sent: Thursday, February 28, 2002 5:40 AM
> > Subject: Re: Clean piano
> >
> >
> > >>. . .  soundboard steel - just be careful with that soundboard
scratching
> > tool (don't ask how I know!). . . . <<
> >   . . . .    . . . .     . . . .     . . . .
> >  >> . . . .used a yard stick to clean the soundboard . . . <<
> > > > > Hazen Bannister
> >
> >     Both the soundboard "squeegees" and yardstick work well, in
conjunction
> > with rags.  With soundboard steels, I file the edges, both sides, ends,
and
> > all around -- it's a hassle, 'cause it's spring steel, but less likely
to
> > scratch the board  -- it still will, but not as easily if you're
> >          --David Nereson, RPT, Denver
> >
>
>