---------------------- multipart/alternative attachment Dale, I would too! Greg Farrell wrote: > I would sure like to see what set up you use. Thanks Dale. Terry > Farrellmfarrel2@tampabay.rr.com > > ----- Original Message ----- > From: Erwinspiano@AOL.COM > To: pianotech@ptg.org > Sent: Sunday, January 27, 2002 10:24 AM > Subject: Re: Mazzaglia Tools/Rib Crowning Jig > In a message dated 1/26/2002 9:44:21 PM Pacific Standard > Time, roy.peters@mindspring.com writes: > > > > > Subj:Re: Mazzaglia Tools > > Date:1/26/2002 9:44:21 PM Pacific Standard Time > > From:roy.peters@mindspring.com > > Reply-to:pianotech@ptg.org > > To:pianotech@ptg.org > > Sent from the Internet > > > > Roy > > > > > Many of us a table saw jig that is > way more versatile than a fixed 60 ft. radius router jig. > If you interested I'll post some pictures later I'm off to > church just now> > > >>>>>>>>>>>>>Dale Erwin > > > > > > Speaking of Mazzaglia... Have any of you used his rib > > crowning jigs for > > a router? They look like a good idea, I'm wondering how > > well they work > > in practice. I could make something similar, but might > > prefer to just > > buy it. > > > > Roy Peters > > Cincinnati > > > > -- Greg Newell mailto:gnewell@ameritech.net ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/84/c5/4d/44/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC