I've resorted to taking a long board and resting it on top of all the bridge pins and pushing down to counteract such an occurrence. Maddening, isn't it! Terry Farrell ----- Original Message ----- From: "Delwin D Fandrich" <pianobuilders@olynet.com> To: "Pianotech" <pianotech@ptg.org> Sent: Monday, December 16, 2002 12:12 PM Subject: Re: Epoxy Repair to bridge top > > ----- Original Message ----- > From: "Ron Nossaman" <RNossaman@cox.net> > To: "Pianotech" <pianotech@ptg.org> > Sent: December 16, 2002 5:21 AM > Subject: Re: Epoxy Repair to bridge top > > > > > > Ok guys, how do we know what condition the bridge root is really in until > > the excess epoxy disappearing into the voids without coming up elsewhere > > (or gushing up elsewhere) tells us? And if you observe something > disturbing > > during the epoxying of the bridge pins in that fine piano, I suppose you > > immediately stop and begin removing the bridge for replacement? Or will > you > > get as much epoxy in there as you can to try to improve it's integrity and > > press on? > > > Personally? I do the latter -- it's all the integrity I can come up with > when I see all that epoxy disappearing into what can sometimes seem like a > bottomless pit. Besides, I've always found it interesting while driving a > pin down in one area to observe another pin an octave or so away start to > pop up. But then I'm easily entertained. > > Del > > > _______________________________________________ > pianotech list info: https://www.moypiano.com/resources/#archives
This PTG archive page provided courtesy of Moy Piano Service, LLC