---------------------- multipart/alternative attachment In a message dated 11/24/01 3:19:28 PM !!!First Boot!!!, erwinpiano@msn.com writes: > What I want to know is at what point you can keep the bloomin thing from > flying out of there as its strung. My best success is to use a bit of > pressure from a pry bar and block to give it a good shove into position > When I string, all the strings are pulled up to some tension. Then, just before chipping, I use the sledge hammer I use to pound in strings, to tap the wedge in place. There is enough tension on the horn to keep the wedge in place during chipping. Wim Wim ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/d7/8d/7a/8f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC