---------------------- multipart/alternative attachment In a message dated 6/25/01 6:31:27 AM Central Daylight Time, jonpage@mediaone.net writes: > I don't see the benefit to this procedure. It seems to me that if you have > to drill the hole extra large for the sleeve you will decrease > the strength of the panel at that point. Then by installing the sleeve and > expanding it with a shank you are further stressing the area. > You will then have a wood to metal to wood bond whereas a shank, dowel or > plug glued in place is sufficient. > > Regards, > > Jon Page > > > I think the metal sleeve give more strenght to this poor and weak design. Willem ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/64/96/81/09/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC