This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment ----- Original Message -----=20 From: Don=20 To: pianotech@ptg.org=20 Sent: Tuesday, June 19, 2001 9:46 AM Subject: Re: piano/violin Hi Dave. I have been away and so could not get my mail. Violins have a *spruce* top and a *maple* back. Other woods have been used sometimes. But the top plate is always a soft wood. Sorry to nit pick. Downbearing on a fiddle is about 1/2 total tension or 40 lbs. --- Dave Nereson <dnereson@dimensional.com> wrote: I > agree that there the similarities end, since the > violin top is carved from > hardwood whereas the piano soundboard is "boards" > butted together side by > side, glued, then arched, or made convex. Dave Nereson, RPT, cellist, > pianist, nit-picker =3D=3D=3D=3D=3D Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. Tuner for the Saskatchewan Centre of the Arts mailto:drose@dlcwest.com http://donrose.xoasis.com/ __________________________________________________ Do You Yahoo!? Spot the hottest trends in music, movies, and more. http://buzz.yahoo.com/ Thanks Don. Of course. My mistake. As a cellist, I know full well = the top is spruce, and the back is maple. Just didn't proofread. = Didn't know the downbearing force, however. --Dave Nereson ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/c6/77/49/94/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC