"You've got the keybed out..." That was yesterday's news. Next time I will know. Terry Farrell ----- Original Message ----- From: "Ralph & Frances Thorn" <pianoralph@sympatico.ca> To: <pianotech@ptg.org> Sent: Wednesday, June 13, 2001 8:00 AM Subject: Re: Leg Plate Screw Anchors > T nuts for sure, replacing the "traditional" leg plates, with locating > dowels as Yamaha uses. You've got the keybed out, so you've got a > perfect opportunity for this operation. Use a 3/8 or 7/16 bolt. This > is a more mover- safe and friendly means of securing legs. I've used > it several times with lyres too. Sure beats lying upside down > struggling with lyre and braces and trapwork! > > Ralph Thorn >
This PTG archive page provided courtesy of Moy Piano Service, LLC