Was/broken plate bolt

[Paul]

Dave
Not soap. It will eventually corrode the fastener (made from just about any
metal except stainless). Use beeswax.

Paul Chick
----- Original Message -----
From: David Renaud <drjazzca@yahoo.ca>
To: <pianotech@ptg.org>
Sent: Monday, June 11, 2001 4:36 PM
Subject: Was/broken plate bolt


> Is a little soap on the threads of a plate screw
> to aid installation an acceptable practice.
>
>                            Dave Renaud
>
>
> _______________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.ca address at http://mail.yahoo.ca
>