Tool making advice

[Lance Lafargue]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
In a soft metal, I'd think there'd be a surer way.  I've drilled a tight
hole and just used super glue before, but this shape will be different and
will need more security.
Lance Lafargue, RPT
Mandeville, LA
New Orleans Chapter, PTG
lancelafargue@bellsouth.net

  -----Original Message-----
  From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of
MBrat70179@AOL.COM
  Sent: Thursday, June 07, 2001 5:24 PM
  To: pianotech@ptg.org
  Subject: Re: Tool making advice


  Hi Lance

  Is it possible to use one or more set screws.

  Mike Bratcher

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/e0/c4/22/a6/attachment.htm

---------------------- multipart/alternative attachment--