PS and plenty of area for thwe weld to hold. \Your jeweler should be able to help you. Joe Goss imatunr@srvinet.com www.mothergoosetools.com ----- Original Message ----- From: "Joe & Penny Goss" <imatunr@srvinet.com> To: <pianotech@ptg.org> Sent: Thursday, June 07, 2001 9:24 AM Subject: Re: Tool making advice > Lance, > Silver solder. > Joe Goss > imatunr@srvinet.com > www.mothergoosetools.com > ----- Original Message ----- > From: "Lance Lafargue" <lancelafargue@bellsouth.net> > To: "pianotech listserv (E-mail)" <pianotech@ptg.org> > Sent: Thursday, June 07, 2001 8:21 AM > Subject: Tool making advice > > > > I need to attach a metal piece into brass stock. This tool will be heated > > with a key easing tool. How can I attach it securely and have it hold > even > > when heated? It will be stressed and needs to be a strong bond. Thanks in > > advance. > > > > Lance Lafargue, RPT > > Mandeville, LA > > New Orleans Chapter, PTG > > lancelafargue@bellsouth.net > >
This PTG archive page provided courtesy of Moy Piano Service, LLC