hanging square hammers - was Keybed Inserts

[Farrell]

This is a multi-part message in MIME format.

---------------------- multipart/alternative attachment
Good point. I'll definitely talk to Abel before moving forward with =
Ronson. Thanks.

Terry Farrell =20
  ----- Original Message -----=20
  From: Jon Page=20
  To: pianotech@ptg.org=20
  Sent: Tuesday, June 05, 2001 8:03 PM
  Subject: Re: hanging square hammers - was Keybed Inserts


  At 09:46 AM 06/05/2001 -0400, you wrote:

    Perhaps some are not aware, but Ronson will reproduce your square =
grand
    hammers fully - including all trimming and horrendous boring angles, =
etc.!

  Consider the clearance draft of those highly raked moldings. Weigh =
recovering
  against rehanging and 'reglueing' ( I don't think you want to get into =
a lot of burning-in
  on those old shanks).

  Good fortune,

  Jon Page,   piano technician
  Harwich Port, Cape Cod, Mass.
  mailto:jonpage@mediaone.net
  http://www.stanwoodpiano.com
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~=20

---------------------- multipart/alternative attachment
An HTML attachment was scrubbed...
URL: https://www.moypiano.com/ptg/pianotech.php/attachments/63/8f/e1/6f/attachment.htm

---------------------- multipart/alternative attachment--