hanging square hammers - was Keybed Inserts

[Farrell]

Thanks. I'll need it! Sounds like you have yourself some real interesting
projects.

Terry Farrell

----- Original Message -----
From: "Ralph & Frances Thorn" <pianoralph@sympatico.ca>
To: <pianotech@ptg.org>
Sent: Tuesday, June 05, 2001 7:49 PM
Subject: Re: hanging square hammers - was Keybed Inserts


> Hello Terry,
>
> Thanks for this info.  You'll save your sanity by going that route.
> We need to save what ever sanity available when we work on squares.
> 'Tis a long time since I dealt with Ronson - I'll call them when I get
> to my next big square project.  Just for interest, my next square is a
> 1828 Nunn, no plate of course, action in two sections, velum hinges
> throughout to be replaced.  Yikes!!  Before that I'm doing a 1852
> Kirkman 6' (fromLondon England) with bar and flat plate framing.  This
> one will get hammers recovered.
> Good luck with the action work on your square.
>
> Ralph Thorn
>