Hi, Square grand hammers, are really a pain. If I had been going to do another set, which I am not, I would have considered sending them to a European supplier, and having them recovered. I think this would end up, being a lot less bother. Regards, John M. Ross Windsor, Nova Scotia piano.tech@ns.sympatico.ca ----- Original Message ----- From: Farrell <mfarrel2@tampabay.rr.com> To: <pianotech@ptg.org> Sent: Sunday, June 03, 2001 11:17 PM Subject: Re: Keybed Inserts > Funny you should bring this up. After weeks of working on the soundboard, > bridges, pinblock and such, I just pulled the action off the shelf today to > give it a look-see! Pretty weird little felty things at the end of the > shanks. I fixed a couple broken little jack springs, and repaired a couple > things on the action frame. Going to refurbish the ivory keys - except for a > few that are all chewed up, they are in very good condition - it appears the > piano received little play. Those are sure the longest keys I have ever > seen! > > I was going to give Ronson a call next week and ask them how they handle > hammer orders. My understanding is that they are the only company that does > square grand hammers. I have not dealt with them before. So, I'll just give > 'em a call and get the scoop. Thanks for your interest. Have you rebuilt > many squares? > > Terry Farrell > > ----- Original Message ----- > From: "Ralph & Frances Thorn" <pianoralph@sympatico.ca> > To: <pianotech@ptg.org> > Sent: Sunday, June 03, 2001 9:54 PM > Subject: Re: Keybed Inserts > > > > Terry, > > We'll be asking you for advice soon. Questions keep our brains > > active. > > You'll probably ask a question or two about hanging hammers on a > > square. > > Ralph Thorn > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC