---------------------- multipart/alternative attachment At 09:41 AM 07/14/2001 -0700, you wrote: >Once again, i am very thankful for ALL the great tips and advice on >"re-stringing the bass"! I do have a tilter, but had not thought of >replacing the pins as they are presently VERY snug, but maybe with new >bass strings I should go with the next size up. Thanks again all!! My only concern would be the angle at which the wire leaves the pin to the bearing bar. If the pins are tight, keep them. If this is an old upright you shouldn't have to worry about wire angle from the pin. Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@mediaone.net http://www.stanwoodpiano.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/ee/b0/ca/6f/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC