Hi Terry, I didn't notice something, what strings are you putting on ? Normal practice is to take the strings off, keeping them in order then sending them off to a string maker to be duplicated. Of course you can do a job by using Universal bass strings but that is not as good and takes longer. Quote customer for two trips, set of bass strings plus % to cover postage and profit margin, + set of oversize pins + 8 hours labour. Before going find out time span for replacing strings so you can give customer approx time of return. Don't forget to mic. a pin so you can get the correct oversize. Listen to all other advise. Regards Tony Caught ----- Original Message ----- From: pianolover 88 <pianolover88@hotmail.com> To: <pianotech@ptg.org> Sent: Saturday, July 14, 2001 12:12 PM Subject: restringing bass > First, thanks to ALL who answered my last email about the D.C.! > > I have a customer who wants the bass section of her 1914 Howard upright > re-strung, but I'm not sure i want to take on the task. There are 42 total > bass strings; 10 mono/32bi-chords. I've left the original strings on so as > not to overstress the 87 year old+ full upright, as i thought it would be > safer to take off old, replace with new as i go. But even at only 10 minutes > per string (old off-new on) it's gonna take over EIGHT HOURS!!! So i'm > thinking maybe I should refer it to another tech who has done lots of this > type stuff before. Thoughts? > > regards all! > > Terry Peterson > Precision Piano Service > Torrance, CA > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com >
This PTG archive page provided courtesy of Moy Piano Service, LLC