At 06:49 PM 02/10/2001 -0700, you wrote: >Apply heat from a soldering iron or small torch to the wire - similar to >using heat to ease a cp bushing. Just don't catch the wood on fire :-) > >John R. Fortiner >Billings, MT. >On Sat, 10 Feb 2001 16:29:14 -0500 staytuned@idirect.com (John Lillico, >RPT) writes: > > Any suggestions for "unfreezing" wooden key dowells? This one is one > > of those imported used Kawaii uprights. The dowell material is great > > in that it seldom cracks apart but the wires twist and break!! > > > > John Lillico, RPT > > Oakville, ON APSCO has pliers which hit around the dowel for turning: Special Pliers, #15441, pg 17 After splitting many dowels I figured it was time to get a pair, haven't broken a dowel simce. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@mediaone.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC