dampers

[jolly roger]

At 09:40 PM 2/7/01 -0600, you wrote:
>Ed, Roger
> Take a look at the trapwork from the pedal to the dowel rod. Sometimes the
>spring on the horizontal beam is loose or rolls badly and takes up most of
>the pedal movement allowing very little travel for the lifter rod.
>
>Paul Chick
Hi Paul,
            Remember the damper is hardly lifting from the key stroke.  But
it's still a good thing to check. I've seen a few of of the trap work
levers twisting, this can cause some strange damper pedal problems.
Roger