---------------------- multipart/alternative attachment Was wondering what's the best way to correct warped (both side to side and or twisted) hammer shanks in order to correct spacing problems. This is an inexpensive console piano. I have an electric shank bender, but it heats up to the point where it can burn shanks. Have never seen instructions on how to use these. 1. Do you wrap a wet cloth around the shank and us the bender to "steam" the shank 2. Do you use a controller between the wall and the bender to control the temperature (like some soldering irons). 3. Do you throw away the electric bender and use another method. Any help, as always, will be most appreciated. And Happy Valentines Day....especially to the ladies. Dick Day Marshall, MI ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/29/43/31/ed/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC