On Sat, 21 Apr 2001 12:42:23 EDT A440A@AOL.COM writes: > > << The bed is now quite rough and the action doesn't slide very > well. > Any suggestions as to how to deal with this.>> > > Greetings, > The first thing I would do would be to use a paint stripper and > remove as much as possible. Then perhaps a very light sanding with a flat > block. Less is better than more. > REgards, > Ed Foote RPT I agree with Ed, remove the finish before potentially removing any wood in the process. After using a paint stripper, wipe clean with Naptha and/or denatured alcohol. Very little sanding should be necessary..... just enough to remove the "fuzz". Mark Potter bases-loaded@juno.com > >
This PTG archive page provided courtesy of Moy Piano Service, LLC