This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Well, Rob: I could never understand why anyone would drink lite beer. = I guess you don't want to get drunk, you just like to piss alot. Cheers; Carl Meyer ----- Original Message -----=20 From: Robert Goodale=20 To: pianotech@ptg.org=20 Sent: Wednesday, April 18, 2001 8:01 AM Subject: Re: Kimball touch weight It sounds like Abel Lights would probably be appropriate on this piano = if you are interested in preserving the original design. (I prefer Bud = Light but I'll take whatever I can get). If the piano is excessively = light, however, normal Abel hammers would certainly bring the weight up = and may be a better choice. As far as relocating the key leads, be sure = to plug the original lead holes first. Failure to due so would cause a = weak area in the key which would then be susceptible to breaking. Also, = it is important to use the same type of wood, (i.e. spruce or whatever), = and line up the grain in the same direction as the original. This will = insure a consistent expansion rate during humidity increases and = minimize the risk of splitting the surrounding key wood. Use a plug = cutter in a drill press to manufacture new plugs. In the past I have = made plugs by cutting them from a set of old keys from a junk piano. = This way they were about the same age and quality.=20 Rob Goodale, RPT=20 Las Vegas, NV=20 Paul wrote:=20 List I'm replacing the hammers on a Kimball player grand about 5'2". = I chose the Abel lights mainly because of the success I've had with them = in the past on other small grands. The action is the old Thayer style. = The wippens have no rep. spring adjustment screw. The touch weight with = the original hammers averaged 30g down and 10g up. The new hammers as = sampled almost eliminate the down weight. Talk about light! The action = has been gone through and new key bushings installed. Friction/pinning = done.The keys have 4 to 5 1/2 oz weights in front of the balance rail. I = know I'm in for a touch weight project, but I can't spend a lot of time = at this. The money situation is very tight. The piano is a gift and the = children are interested in piano. A quick fix is out of the question. I = was wondering if anyone has a trick or two for just removing the = original key leads and moving them to get this thing to work. I'd like = to end up with a touch weight of about 45g. Does this sound reasonable? = Paul Chick ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/b3/3c/ab/f7/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC