Dave, Thanks for the offer, but a tech friend here in San Francisco had a box of them from Schaff and then they look identical. It sure is nice to be able to go to the List with requests/questions and see them filled before your eyes! David I. > -----Original Message----- > From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf > Of David M. Porritt > Sent: Wednesday, October 25, 2000 5:10 PM > To: pianotech@ptg.org > Subject: RE: Steinway let-off screws > > > David: > > I have a few old Steinway let off screws. I think they are > longer than any > I have gotten from Schaff. Let me know if you need some of them. I have > most of a set. I had a whole set, but the jar fell off the bench > and....well, I found most of them. > > dave > > *********** REPLY SEPARATOR *********** > > On 10/25/00 at 6:15 PM Ron Nossaman wrote: > > >>Where do I get let-off screws for a steinway? Does anyone have an old > rail > >>with some they could sell me? I would hate to try to get it from > Steinway. > >>Will the Schaff ones work? > >> > >>David I. > > > > > >The Schaff ones should work fine. I just remembered this and checked one > >against my action model, which incidentally has Teflon centers and an > >unleathered felt knuckle. No date though. Go figure. > > > > > >Ron N > > > > > David M. Porritt > dporritt@swbell.net > Meadows School of the Arts > Southern Methodist University > Dallas, TX 75275 > >
This PTG archive page provided courtesy of Moy Piano Service, LLC