?Thanks for you're reply. I'm going to wait and see what other responses I get befor I take action. I've always wonder about those wooden ones. I've never used one, but I thought they would be better for shop use only. Lynn Rosenberg ----- Original Message ----- From: Joe & Penny Goss <imatunr@primenet.com> To: <pianotech@ptg.org> Sent: Friday, October 20, 2000 12:47 AM Subject: Re: Tilt it somehow > Hi Lynn, > The design of my tilter has two features added by myself. > After almost dumping a piano off the tilter when setting the piano back up, > I welded a longer sharp spur to keep the piano from slipping off. And the > second thing was to drill 1/8 inch holes in the two bolts that originally > held the 2 tilter cross braces in the open position. > (On small spinets sometimes I block up the bottom of the piano to keep the > tilter and piano from tipping back up as most of the weight is at the bottom > end of the tilter.) > This allows quicker setup and teardown. Mine is the tubular style and is > just short enough to fit in a Windstar van right behind the driver seat. > My first one was made out of 3/4 inch ply wood with a two foot radius on > the tilting end and 2x4 cross braces and two iron feet to pick up the piano. > It worked fine but I always worryed about being under or beside it if it > ever broke down. > Joe Goss > > > I have used both types of piano tilters. The one made of angle > iron > > with clamps, the clamps never worked well, or always fell off, and the > > tubuler type tilter, which is more of a pain to fold and unfold. The > first > > piano I restrung, I borrowed a tilter that was tubuler, round, and only > > three knuts to assemble. Very simple. I was told that the company went > out > > of business years ago. Would like to find one of those old tilters. My > > current one is like a buggy, and was purchased from Schaff piano Supply. > > Has anybody ever tried to redesign the tilter or thought of making a > decent > > one??? Lynn Rosenberg > > ----- Original Message ----- > > From: Clyde Hollinger <cedel@supernet.com> > > To: <pianotech@ptg.org> > > Sent: Thursday, October 19, 2000 8:06 PM > > Subject: Tilt it somehow > > > > > > > Friends, > > > > > > Bear with me as I encourage all those who have not yet bought a piano > > tilter to > > > do so, assuming you would ever have a need for one. I no longer need to > > be > > > frustrated with repairs that would be easy *if only* I could lay the > piano > > on > > > its back. Granted, I don't use it that often, several times a year > maybe, > > but > > > already it's been worth every penny, and it will last longer than I > will. > > > > > > Regards, Clyde > > > > > > Kurt Matthies wrote: > > > > > > > If you could somehow tilt the upright so the bridge were horizontal, > > > > it would really help. > > > > > > > > > > > > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC