John: If you want a copy let me know and I'll scan it and send to you. John R. Fortiner Billings, MT. On Fri, 6 Oct 2000 06:35:20 -0300 piano.tech@ns.sympatico.ca (John Ross) writes: > Hi Carl, > The individual notes, are set by precision resistors. But it takes > two adjustments to make the octave the proper width. > You have to go back and forth on these adjustments, as they > interact. You must use a counter, that measures period. > It has been a long time since I did one, so I am not 100% > sure of the type of measurement the counter does, but I know > it is just not the normal every day frequency counter function. > This is because the signal is not just a sine wave, but is a complex > waveform. > To get the A right on, if it is off, just loosen the knob and zero > it, > then tighten it in that position. > Regards, > John M. Ross > P.S. After I upgraded to a SAT, I gave the Calibrate info away. > > ----- Original Message ----- > From: "Carl Teplitski" <koko99@mb.sympatico.ca> > To: <pianotech@ptg.org> > Sent: Wednesday, June 21, 2000 1:51 PM > Subject: SOT > > > > Am owner of a SOT ... have been reluctant to use because > > I wasn,t sure calibration was correct. Could someone tell > > me if there is more than one adjustment to be made. > > Thought I heard someone say that there was. > > > > I sometimes feel like the lights are on, but there,s no one home. > > > > > > Carl > > > > > ________________________________________________________________ YOU'RE PAYING TOO MUCH FOR THE INTERNET! Juno now offers FREE Internet Access! Try it today - there's no risk! For your FREE software, visit: http://dl.www.juno.com/get/tagj.
This PTG archive page provided courtesy of Moy Piano Service, LLC