I agree with Newton that the 2 year course in Boston is the best but can you afford it? If not I think the Randy Potter course, along with an association with a good PTG technician and active participation in the local chapter will get you there. By the way the SF Chapter is just a little North of you and we pride ourselves on being the most Northern chapter in the Bay Area. ;-} David I. -----Original Message----- From: owner-pianotech@ptg.org [mailto:owner-pianotech@ptg.org]On Behalf Of Newton Hunt Sent: Sunday, October 01, 2000 7:13 AM To: pianotech@ptg.org; Hotsteno@cs.com Subject: Re: Wanna be piano tuner > Is this the truly the best way to learn? > What equipment do I need to buy? Where should I get it from? > Should I reconsider taking a correspondence course? > Is there anything else I should know about? Dear Melissa, You ask such hard questions. The ones that will effect the rest of your life. My name is Newton Hunt and you will likely find some of my few post posts in the archives. I am known as the old opinionated curmudgeon around here. That being said... I have taught piano technology as my full time occupation in a structured two year course and I have taught individuals from the beginning and I have taught people already in the field to help upgrade their skills. I went to a two year course in Vancouver WA and have been trying to figure out this business for the last 38 years. When I think I have a grasp on it all I forget it and have to start all over again. The technology in this trade has been changing more in the last ten years than in the last century so it is a moving target. You are an adult who has thought abut this for a long time yet young enough that such a career change will be possible, appropriate, long lasting and it can profoundly change your life and livelihood. The best school is the one in Boston, a two year course as well, the most comprehensive school in this country. There is one in Toronto Canada. There are more but these are the best ones I know of. It is possible to learn from an individual as an apprentice but this route leaves great holes in your education that will take years and cost vast amounts of time, effort and money to completely fill, if ever. You could also associate yourself with someone like myself that is retired and has the time to devote to such a project. I consider these means inferior to a school despite the fact I have taught and have many teaching aids to help along the way. It takes _time_ and a close and trusting relationship. The vast advantage of going to a school is that you can start making good money with good skills, as an independent, immediately after graduation which is not always the case as an apprentice or private tutors. School is the most expensive route there is but I think those on this list who have had the advantage of schooling will attest to it's advantages. I am retired but never seem to run out of things to do but you would need to live near me, New Jersey, for us to be able to work together on teaching you the trade as would be the case with anyone else you work with. Please bear in mind that it takes as much time, and often more, to master this trade as it does most any other 19th century skills. A master carpenter usually takes eight to ten years to reach that level and so does a competent piano tuner technician. Two years in school and three to five years of field work with continuing education can produce a concert level tuner and technician. Consider how long it took you to learn and _master_ court reporting. The endless hours of practicing, the endless hours of class instruction. A new life's work will take as long or longer because you will need to learn the technology, the techniques, master the skills and retrain your senses to new perceptions. I am not trying to discourage you but trying to make you understand that you will be biting off a huge chunk to chew. You can be independent, work for yourself, determine your own hours, make a decent living, meet wonderful, educated, art involved and generally successful people practicing your craft. I worked my craft for 35 years and would be hard pressed to think of a different route for my life than the one I chose. I am, by my lights, successful because I know enough to fool most of the people into thinking I know more than I do. I have written, spoken, taught and earned the respect of a few of my peers. _I_ have given some people a new lease on life and of that I am inordinately proud, I have made a difference in the world, a very small one but a difference. You should buy your tools after you have learned how to use them so you will know what size, type and quality to buy and know how to select those that fit your hands. I have pulled your leg a bit here, in fun, but I am pleased you wish to make a difference in your life and that you have chosen the same path I was forced into but accepted and did well in. Good on you. If you wish you can contact me by email, nhunt@jagat.com, phone 732-339-9378 or come to New Jersey. Next week I will be in Illinois working with another technician, in his shop, helping him with his specific problems and general knowledge. I look forward to hearing from you. Newton J. Hunt PTG member since 1965
This PTG archive page provided courtesy of Moy Piano Service, LLC