SAT procedures: HINT!!!

[Farrell]

Hey, thanks Michael. Done. SAT III users (like me) need to be aware that
these instructions are for the older SATs and some of the buttons are
different.

Terry Farrell
Piano Tuning & Service
Tampa, Florida
mfarrel2@tampabay.rr.com

----- Original Message -----
From: "Michel Lachance" <michel_lachance@hotmail.com>
To: <pianotech@ptg.org>
Sent: Monday, January 31, 2000 12:58 PM
Subject: SAT procedures: HINT!!!


> Go to the Manual Web page:
>
> http://www.concentric.net/~fast440/atm/atm.html#apa
>
> Go to the Concise Step-by-Step Tables of Standard Routines section.
>
> Select and copy the whole chapter, paste it in your word processing
program
> and print it.  You can carry this simple sheet along with you.  It had
been
> very useful to me more than one time.
>
> Michel Lachance, RPT
>
> >From: "Farrell" <mfarrel2@tampabay.rr.com>
> >Reply-To: pianotech@ptg.org
> >To: <pianotech@ptg.org>
> >Subject: Re: SAT procedures
> >Date: Mon, 31 Jan 2000 10:52:34 -0500
> >
> >Um, I know I am not a greater SAT user than many, but it is likely
related
> >to people like me that simply have not memorized ALL the SAT keystrokes.
I
> >ofter turn my SAT off right before checking calibration or switching from
> >pitch raise mode to regular tuning, etc. But this is only because I do
not
> >carry my manual with (and certainly do not wish to take it out in front
of
> >a client ;-)) me and I simply forget, or am not completely sure which
> >keystrokes reset the machine or turn off various functions or modes. I
know
> >if I turn the unit off, I am back to start!  Hmmm, maybe I'll get my SAT
> >manual out next time I feel a little insomnia coming on!
> >
> >Terry Farrell
> >Piano Tuning & Service
> >Tampa, Florida
> >mfarrel2@tampabay.rr.com
> >   ----- Original Message -----
> >   From: J Patrick Draine
> >   To: pianotech@ptg.org
> >   Sent: Monday, January 31, 2000 8:07 AM
> >   Subject: SAT procedures
> >
> >
> >   Dear Greater Experts on SATs Than I:
> >   Sometimes I see it recommended that one turn one's SAT off & on when
> >going through various FAC procedures. Why? It's not necessary to turn it
on
> >& off to recalibrate the machine.
> >   Someone also recently suggested tapping the TUNE button twice to go
into
> >TUNE mode from an FAC generated tuning page. Why twice? Once seems to
work
> >just fine for me.
> >
> >   What's the scoop?
> >
> >   An SAT user of many years,
> >
> >   Patrick Draine
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
>