---------------------- multipart/alternative attachment Hi Robin, For what it is worth. I have rebushed and reused a set of old flange's, with a set of new wippens. It is important to carefully measure the centre line of the centre pin wrt to the cut out for the rail. 1mm off in this area can significantly alter the touch weight. Roger. > > Dear list, > > Have any of you had to deal with putting new whippen flanges on an old (1929) > Steinway grand?? If so, what problems arose?? And how did you resolve them? > > Specifically, were there any geometry difficulties introduced as a result? > Was the keybed to string height different than on a modern instrument? Were > there problems getting the piano to regulate correctly? > > Thank you, > Robin Blankenship > Associate Member Roger Jolly Saskatoon, Canada. 306-665-0213 Fax 652-0505 ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/a3/81/57/c6/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC