This is a multi-part message in MIME format. ---------------------- multipart/alternative attachment Hi all, for those of you who have a SAT ll or lll The last few months when doing = a pitch raise I have been doing the following. 1. Set the FAC then measure A2 to find an average raise for all bass = strings. 2. Re set the pitch raise program at the first plain wire string. 3. re set at middle C if piano is dropping, otherwise reset at the first = break and second if any. 4. Arround D5 to C8 watch for drift of the string going flat after a = solid test blow and retune if this occurs 5. Tune from A0 to C8 So far using this method has resulted in a very acceptable result on the = first pass.=20 Joe Goss ---------------------- multipart/alternative attachment An HTML attachment was scrubbed... URL: https://www.moypiano.com/ptg/pianotech.php/attachments/29/06/49/0d/attachment.htm ---------------------- multipart/alternative attachment--
This PTG archive page provided courtesy of Moy Piano Service, LLC