Ron: Just a big THANKS for the clamping tip. John R. Fortiner On Mon, 03 Jan 2000 18:09:48 -0600 Ron Nossaman <RNossaman@KSCABLE.com> writes: > >Geez you just can't do anything right huh? It should be "and to > whom am I > >speaking" Please! > >:-) > >Jim Bryant (FL) > > > Well, you got me there, and since no traffic is apparently better > than non > technical traffic... here's a little technical tip from your Uncle > Ron so's > I don't lose my place in line. > > Either galvanized iron pipe is getting softer, or I've lost all > contact > with any level of finesse (Yea, Jim, I know, and any trace of social > propriety too), but I have finally gotten tired of bending pipe > clamps and > did something about it. I went to my local salvage yard during last > week's > bandsaw modification shopping trip and picked up some steel rod of > an > appropriate diameter. I cut it into the lengths I needed, threaded > one end > of each piece, and assembled a half dozen killer/masher clamps > suitable for > putting ridiculous levels of pressure on small defenseless objects. > The > final result is a lot heavier than the engineered spec, but I should > be > able to do considerably more damage with these. > > Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC