At 05:30 PM 02/26/2000 -0800, you wrote: >Hello All, > >What do you use to get the felt to adhere to the plate? > >Thanks. > >Martin > Cold hide glue applied with an artist's brush and allowed to become tacky before laying down the felt. Sometime it is necessary to 'double glue' which is to lay the felt onto the glue then remove and apply another lighter coat of glue and wait for it to become tacky again. For bass counter bearing humps, glue the front half and secure the felt with masking tape. When that is dry, apply glue to the rear half and bend the felt over the curve and hold in place with masking tape. The trick is to first adhere the tape to fabric to render it less sticky and then apply to felt/plate margin. Regards, Jon Page, piano technician Harwich Port, Cape Cod, Mass. mailto:jonpage@mediaone.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC