Gluing sound board cracks back to ribs.

[Wimblees@AOL.COM]

In a message dated 2/13/00 4:14:23 AM !!!First Boot!!!, 
remoody@midstatesd.net writes:

<< The problem is a cracked soundboard, and one side of the crack has
 pulled away from the rib about as far as to slip a business card
 through if it were cut in half.    This is in a full sized upright,
 player piano actually.  I must make any repair from the rib side.   >>


Another way to do this is to screw an eyelet into the rib, and put a screw 
through the eye into the soundboard, and pull the soundboard to the rib. 
(with glue there of course). 

Willem