Hi Bruce, In Paul Revenko-Jones restringing course, in Kansas City this past summer, he commented, that with the quality strings made by GC, twisting is unnecessary. -----Original Message----- From: Pianogreig@AOL.COM <Pianogreig@AOL.COM> To: pianotech@ptg.org <pianotech@ptg.org> Date: Friday, February 11, 2000 12:46 PM Subject: Re: Restringing >I agree that GC makes beautifully musical sounding bass strings. The number >is 416-755-7109. Be aware that these strings are wound opposite to American >bass strings. This is important when twisting a full turn in the direction >of the winding before installing. > >If this restringing job is a baby you probably won't encounter plate flange >wedges but look at the bass/tenor flange (& others as well) to see if there >is a wedge - if there is it may well fall out of place when the tension is >let down. You can tape it in place to keep it there - if it already seems >loose it might need further tapping in. > >You'll also want to tighten all plate bolts/screws with the tension down. >Also when turning out the old pins don't do it high speed as that will burn >the wood and cause jumping pins; touching the threads of the pins will have >the same effect - use the chalk dust that they are packed in to keep your >fingers dry. > >Have fun!!! > >Bruce Greig, RPT, NYC
This PTG archive page provided courtesy of Moy Piano Service, LLC