>This phenomina, "set just a tad high", is actually intended by the Yamaha >piano makers to be there in new verticals. I remember hearing this >mentioned by the instructors during one of their classes at a convention. >Unfortunately, I don't remember the reason for doing so. > >So applying any method of removal of this "set just a tad high" thing on >new Yamaha verticals defeat its purpose for being there. > >Keith McGavern Well, I do remember my reasons for starting to do this. There are two. The first was common complaints of repetition problems, traceable to the fact that the capstans were set too high. The second was that enough settling occurred in the next year or so that it was necessary to re regulate the capstans if they were adjusted to relieve the complaint from reason one. I assume that these capstans are left high in the first place because of reason two. Trouble is, that had the secondary effect of producing reason one. Since I feel that the immediate customer complaint has priority (within reasonable mechanical limitations) over manufacturers' allowances for anticipated settling, this gets everyone off the hook without wasting time duplicating effort after the action settles down. One nice "feature" of my dodge is that it's nearly instantly reversible. Any other tech who happens along and sees what I've done can restore the original capstan adjustment and repetition problem to like new condition by pulling out the bushing cloth. It shouldn't take more than 15 seconds even if he drops his tweezers twice. So what do you tell customers with new Yamaha verticals who complain about repetition problems to get them to put up with it until next year? Mine don't want to hear that. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC