----- Original Message ----- From: "Susan Kline" <sckline@home.com> To: <pianotech@ptg.org> Sent: December 21, 2000 9:14 AM Subject: Re: Danger technical content!! > Thanks, Cuz. That's a fun site, too, and the cost of the 1/2 ton > is certainly not too steep. I can see that it is strong as all > get out, with good mechanical advantage. > > One question ... you were talking about putting on jigs to > press in capstans or backchecks. How can they be mounted? > > Susan ---------------------------------------------- I don't know about Jim's, but mine was pretty crude. I simply drilled a couple of holes in the base so I could mount a wood base beneath the ram. I then make whatever type of fixture I need to fit this base. Nothing fancy. Del
This PTG archive page provided courtesy of Moy Piano Service, LLC