Sounds great to me, especially if it has Del's blessing. Where do you buy one of these wonder thingees.??? I suppose an auto parts store? ----- Original Message ----- From: "Delwin D Fandrich" <pianobuilders@olynet.com> To: <pianotech@ptg.org> Sent: Wednesday, December 20, 2000 8:49 AM Subject: Re: Danger technical content!! > > ----- Original Message ----- > From: <JIMRPT@AOL.COM> > To: <pianotech@ptg.org> > Sent: December 20, 2000 7:01 AM > Subject: Danger technical content!! > > > > Et Al; > > Well this year I searched for THE item dejure and settled on a 1/2 ton > > bearing press. :-) > > > What I bought it for was to press out old keyweights and to press in new > > keyweights. It also will do an exemplary job of expanding the weight to > stay > > snug in the hole. > > I have made several different sized 'tips' to fit on the press drift to > > match different sized weights. In addition I have made an 'asterick' > shaped > > tip for expanding all size weights. > > ------------------------------------------------------- > > With suitable 'tips,' they also work quite nicely for pressing in capstans, > backchecks, etc. > > Del >
This PTG archive page provided courtesy of Moy Piano Service, LLC