Variable overpull percentage (was: Finishing where you started)

Michel Lachance michel_lachance@hotmail.com
Mon, 04 Dec 2000 08:15:03 -0500


Besides having a preset setting that is VERY effective, RCT overpull 
percentages are customizable from 0% to the most irrational extend for each 
note on the keyboard.

Another way to answer the question:  yes, you simply tune without overpull.  
Even Sigth-o-tuners have that features.  :-)

Michel Lachance, RPT

>Hi Paul,
>
>Would there be any point in setting a precalculated over pull to zero 
>percent? I can't think of any reason to do so. Can you?
>
>At 08:17 PM 12/03/2000 -0800, you wrote: >Don't understand the question. > 
> >Paul > >Don wrote: > >> Hi Paul, >> >> Over pull is user defineable on 
>RCT so 0% is possible (but why?) >> >> At 07:34 AM 12/03/2000 -0800, you 
>wrote: >> > The percentages can also be tweaked for the technician's 
>individual >> >tuning style. If there is a risk of string breakage, I often 
>use the fine >> >tune mode to get it close to pitch without overpull, then 
>use the pitch >> >raise mode as a final tuning. Paul S. Larudee 
>DGPEAKE@AOL.COM wrote: In a >> >message dated 12/2/00 12:23:06 PM Pacific 
>Standard Time, >> >larudee@pacbell.net writes: >> > >> > Agreed, but there 
>is a big difference between having no problem and >> having >> >a pitch 
>raise so accurate that all it needs is a little touchup. Paul S. >> 
> >Larudee >> >Richmond, CA DGPEAKE@AOL.COM wrote: I believe the overpull is 
>25% of the >> >2nd partial. Someone please correct >> >me >> >if I am 
>wrong. (Jim, please pitch in). The SAT 3 is the same. I usually >> >measure 
>the lowest note of the plain wire, offset for pitch raise, and >> > I have 
>no problems with doing a pitch raise using this method. Dave >> >Peake, RPT 
> >> >Portland Chapter >> >Oregon City, OR >> 
> >www.davespianoworks.locality.com >> > >> > >> >Really? 100% of the time? 
>Yes, sometimes it is so close that I hardly move >> >the pins. Other times 
>it is still a little flat or a little sharp. Dave >> >Peake, RPT >> 
> >Portland Chapter >> >Oregon City, OR >> >www.davespianoworks.locality.com 
> >> > >> >> Regards, >> Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T. 
> >> >> Tuner for the Saskatchewan Centre of the Arts >> >> 
>drose@dlcwest.com >> http://donrose.xoasis.com/ >> >> 3004 Grant Rd. >> 
>REGINA, SK >> S4S 5G7 >> 306-352-3620 or 1-888-29t-uner > > >
>
>Regards, Don Rose, B.Mus., A.M.U.S., A.MUS., R.M.T., R.P.T.
>
>Tuner for the Saskatchewan Centre of the Arts
>
>drose@dlcwest.com http://donrose.xoasis.com/
>
>3004 Grant Rd. REGINA, SK S4S 5G7 306-352-3620 or 1-888-29t-uner
_____________________________________________________________________________________
Get more from the Web.  FREE MSN Explorer download : http://explorer.msn.com



This PTG archive page provided courtesy of Moy Piano Service, LLC