Tool Case

[Eugenia Carter]

Joe,

Your post prompted me to do something I've been putting off, so this morning
I took inventory. These take care of almost all my in-home service. When I
do have to go to the car for something else, I consider it out of normal
service and charge accordingly.

Tool Case Carried Daily

Camera bag, flexible unknown material, not leather, vinyl or plastic. Handle
plus Carrying Strap. Been using it since about 1988.

Size:  9"x 7 ½", weight 11 lbs.

Three pockets total; 2 pockets 9", 1 pocket 5 ½"

Main pocket  9"x 5":
Accu-tuner III; small mirror; sandwich plastic bag of felt mutes (for
grands), thumper (for when wrist gets sore), chalk, key dip block;
hygrometer; wood glue; 3 piano lock keys; misc shims, CA glue solvent,
Protech MPL-l; A440 tuning fork, glide bolt tool, 2 ½" brush; Spurlock
upright lid prop; spare needles, misc sandpaper strips, flashlight; ear
plugs; 1 ¼" each Phillips and flat head screwdrivers - two sizes each;
separate felt must for Teflon dry lubricant (all liquids in individual
plastic bags)

Second Pocket 9" x 2 ½"
Extension tuning hammer, 3 voicing files, CA Glue, Spurlock Teflon Powder,
Yamaha voicing tool, single needle voicing tool, spare AAA batteries, two
voicing blocks, bag of rubber mutes, chalk, string hook, tuning pin gauge;
Protech Spray Lubricant (all spillables protected in plastic bags);
needlenose Junior Vice Grips

Small side pocket:

Craftsman Locking Pliers; Renner key easing pliers (the ones you don't have
to remove the key), screw-holding screwdriver, Swiss Army Knife, hammer,
black magic marker, 4 in 1 screwdriver.

Also, tool roll that holds: 4" pliers, Vice Grip Junior, 3/16 flat
screwdriver; damper underlever screwdriver, magnetic pickup, Allen wrench,
chopstick voicing tool, 4" scissors, travel paper, brass wire mute handle,
brass rod, 6" ruler, S&S letoff tool, awl, butterfly spring tool, 6"
tweezers, balance hole easer, capstan tool, Yamaha drop tool, off set key
spacer.

Gina

Gina