just wondering what others do? After setting your bearings do you tune all the way up and then do the bass? This is what I usually do, then for a change I'll do the bass before the treble - if pitch was close I haven't noticed any difference. Is there any reason to tune treble/bass first? >From: "Michel Lachance" <michel_lachance@hotmail.com> >Reply-To: pianotech@ptg.org >To: pianotech@ptg.org >Subject: Re: piano tuning method >Date: Mon, 21 Aug 2000 22:26:19 EDT > >Bill, > >That's a very good response you have put there. We really have to know >what >piano tuning is about in order to understand that is may not quite fit into >the do-it-yourself fashion. > >However, there is just one thing I may disagree with. I understand that >tuning from A0 with the aural method is the most unappropriate way to >proceed. But since the change of tension in the bass section has more >effect in the opposite section (treble) than the other way around, it is >totally relevant to tune bottom up with a *good* ETD (read RCT, SAT or >TuneLab) in order to ensure more stability, specially in pitch raising. >Scientifically proven. > >Michel lachance, RPT > >>While I do know of excellent technicians (even highly skilled RPT's) who >>start tuning on the note A0 and proceed in one direction through to note >>C8, >>to me, in my opinion, this is about the most illogical way to tune a piano >>that may be conceived. I would never, ever do that. > >>Bill Bremmer RPT >>Madison, Wisconsin > >________________________________________________________________________ >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com > ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
This PTG archive page provided courtesy of Moy Piano Service, LLC