Mitch I purchased a portable/folding piano tipper from Schaff over 25 years ago. The thing looks flimsy and loves to pinch fingers, but I've tipped many uprights with great success. I found it best to pull back on the tipper and lift the piano off its back casters. Then carefully pull the piano back against the slanted tipper and proceed to roll it backward. This technique keeps the piano from scooting forward off the tipper, especially if you're working on a hard floor. Paul Chick ----- Original Message ----- From: Mitch Ruth <mitch_ruth@hotmail.com> To: <pianotech@ptg.org> Sent: Tuesday, August 15, 2000 6:53 AM Subject: Tilting Pianos > Hello all. I've been using the archives for a little while now and I'd like > to join the fray. I'm getting ready to do a caster replacement job on a > Baldwin Hamilton in a local school. I do not have a piano tilter as of yet. > My plan is to get several helpers to put the piano on it's back (on blocks > of course). I would appreciate any caveats or suggestions from those of you > with more experience. Also, I think I should remove the action from the > piano while doing this. Thanks for any help. > > Mitch Ruth > DeMossville, KY > mitch_ruth@hotmail.com > ________________________________________________________________________ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com >
This PTG archive page provided courtesy of Moy Piano Service, LLC