At 06:45 AM 3/11/99 -0700, you wrote: >I have a knuckle replacement job coming up on an almost new Samick. > >Are there any tips for doing this task? It will be my first such. I'm >sure I can get it done, but some advance advice may make it easier. > >I searched the archives and didn't find anything especially addressing >this. So any helpful suggestions will be gratefully appreciated. > >Arlie > >Arlie D. Rauch >Glendive, MT > >If you have nothing better to do, check out >http://members.tripod.com/~Turbooster/. You'll be glad you did. > At the Providence convention Rick Baldassin mentioned to cut/ream the slot a little larger and then once that the knuckles (rollers) were in place to clamp them with strips of wood to align them. Pretty good idea I thought, Jon Page Harwich Port, Cape Cod, Mass. (jpage@capecod.net) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This PTG archive page provided courtesy of Moy Piano Service, LLC