You should be able to lift one end up a bit a slide a 2 X 4 under it. This should give you clearance for a socket. Don't know what size though. You also could tip the piano back towards a wall, leaning it against the wall...CAREFUL. That might give you space. David I. Date sent: Mon, 13 Dec 1999 07:42:16 -0500 To: pianotech@ptg.org From: J Patrick Draine <draine@mediaone.net> Subject: P2 mute pedal bracket mount Send reply to: pianotech@ptg.org > Dear List, > I'm reconditioning a beatup old Yamaha P2 which had the middle pedal > mangled. The pedal bracket is attached by (and pivots on) a bolt which > comes up from the bottom board. I can't loosen the nut on top because I > can't get a grip on the head of the bolt. Can those of you experienced with > this recommend a particular tool which can grip the bolt head (without > putting the piano on a tilter)? > TIA, > Patrick > David Ilvedson, RPT Pacifica, CA ilvey@jps.net
This PTG archive page provided courtesy of Moy Piano Service, LLC