Del, Don't worry, any "good" engineer would know you were going to do that anyway ;-) doug -----Original Message----- From: Delwin D Fandrich [mailto:pianobuilders@olynet.com] Sent: Wednesday, August 18, 1999 12:31 PM To: pianotech@ptg.org Subject: Re: Was V-Pro, now welded plates ----- Original Message ----- From: <A440A@AOL.COM> To: <pianotech@ptg.org> Sent: Wednesday, August 18, 1999 10:57 AM Subject: Re: Was V-Pro, now welded plates > Del said, > >uh, who said anything about casting? > > > > Hmmm, Ok, I see. Del is going to start out with a 3,000 lb. chunk of steel > and a really good CNC milling machine, and cut that sucker out of a solid > billet! > (?) > Regardsm > Ed > Darn, the secret is out... Del
This PTG archive page provided courtesy of Moy Piano Service, LLC