Oops this might clear up my intentions. The action will slide out directly on to the table. Joe ---------- > From: Joe & Penny Goss <imatunr@primenet.com> > To: pianotech@ptg.org > Subject: Measurements Please > Date: Saturday, August 07, 1999 6:40 AM > > Hi all, > Those of you who will be working on a grand piano today, if you could take > the measurement (in inches ) of the floor to the sill of the action cavity > and send it to me it would be most helpful. > I am designing a portable table for use in the home doing regulation etc. > for uprights and grands. > So far the measurements have been around 27 1/2 inches. > If the piano is on a dolly, please give that information also. > So as to not take up a lot of list space please contact me at > imatunr@primenet.com > Joe Goss
This PTG archive page provided courtesy of Moy Piano Service, LLC