Carman, We use Nippon Denro pins. Since I can't stand the look of nickel plated pins -- don't like tuning pianos strung with them either -- we use only blued pins. We get them from several sources. Try APSCo, Schaff, etc. Del (the other Fandrich) Delwin D Fandrich Piano Designer & Builder Hoquiam, Washington USA E.mail: pianobuilders@olynet.com Web Site: http://pianobuilders.olynet.com/ ---------------------------------------------------- ----- Original Message ----- From: Carman Gentile <cgpiano@webtv.net> To: <pianotech@ptg.org>; <nossaman@SOUTHWIND.NET> Sent: Tuesday, August 03, 1999 6:03 PM Subject: tight pins > Where does one find "rolled" pins these days. > I asked Baldwin and Fandrich and the upshot was that rolled pins are no > longer made--that cut pins hold better. > > So, if I want blued (not plated), rolled (not cut) tuning pins, what > vendor carries them? > > Carman Gentile RPT > Redwood Chapter > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC