For an upright: Take off a hammer head and put it back with no glue so it clicks when struck, do the same with the hammer butt. Replace the cushion felt with too thin a piece and too thick a piece - messes up the touch. For a Grand (not for a S&S though) Move the wippen rail at the action standards (back or forward) so the wippens are all out of alignment with the hammer rollers (knuckles) and capstans. Move the hammer rest rail so the tails of the hammers hit it. Brian Lawson _______________________ Lawsonic Pianoforte Services PO Box 751097 Garden View Johannesburg 2047 South Africa Voice Mail +27 (0)88 127 6584 http://www.bigfoot.com/~lawsonic ICQ: 28573941
This PTG archive page provided courtesy of Moy Piano Service, LLC