In a message dated 98-11-14 11:24:30 EST, you write: << is, would Weldbond be the better glue choice for the repair? And would a piece of ivory keytop (of which I have some) serve as an adequte reinforcement or would it be better to use thin veneer. This is an instrument that is in rather poor condition but it's all the family has and can afford. >> Ralph: This sounds like a perfect place to use CA glue. Reinforce the sides with whatever, but glue the crack ,hold it steady and "shoot" it with an accelerator. Ifr you haven't used this yet, this would be a pefect spot. Let the list know what you finally did and what worked. Bob Bergantino,RPT Cleveland, ohio
This PTG archive page provided courtesy of Moy Piano Service, LLC