Michiel You wrote "take sandpaper #180 , a sanding cork, Now I gotta know what a sanding cork is. I hope it is an excuse to go out and buy some good wine. Ric Corkless In South Dakota ---------- > From: Michiel van Loon <mvanloon@xs4all.nl> > To: pianotech@ptg.org > Subject: Re: Hitch Pin Understringing Felt > Date: Friday, November 13, 1998 3:58 PM > > Lance, > The thing to do in this situation: > Put the piece of felt on the hitchpins, > take sandpaper #180 , a sanding cork, put one hand on the felt and gently > sand over the felt in strokes away from your hand. When the pins are showing > throu the felt, (the holes don't have to be the same size as the pins) push > the pins throu the felt. Do this in small sections. > Regrads, > Michiel van Loon >
This PTG archive page provided courtesy of Moy Piano Service, LLC