Vince, Is the piano being discussed a Steinway 'B'? I can't remember for sure. For what models is that figure valid? Avery >One thing that might relate to that is the height difference of the two >centers you speak of, with the stack off the frame. The spec for that is 2 >1/2" height difference. > >At 04:09 PM 7/27/98 -0400, you wrote: > >>It would be helpful if you >>posted the specification for the height of the wippen center pin and the >>hammer center pin when the stack is on the frame and the frame is >>sitteng on the flat service with balance rail studs just touching the >>service. > >> Newton >> nhunr@jagat.com >> >> >Vince Mrykalo RPT >vince@byu.edu
This PTG archive page provided courtesy of Moy Piano Service, LLC