One thing that might relate to that is the height difference of the two centers you speak of, with the stack off the frame. The spec for that is 2 1/2" height difference. At 04:09 PM 7/27/98 -0400, you wrote: >It would be helpful if you >posted the specification for the height of the wippen center pin and the >hammer center pin when the stack is on the frame and the frame is >sitteng on the flat service with balance rail studs just touching the >service. > Newton > nhunr@jagat.com > > Vince Mrykalo RPT vince@byu.edu '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' '''''''''''''''''''''''''''''''' Sense is an uncertain guide. Numbers cannot fail. - Pythagoras
This PTG archive page provided courtesy of Moy Piano Service, LLC