Part of Del Fandrich's post: >...Baldwin verticals do not use that type of action mounting. The top of >the bracket is >curved in to meet a cast stud on the plate. There is a hole in the top of >the action >bracket through which a bolt is place affixing the top of the bracket to >the plate... The newer models, yes; for older models, no. For the newer models I've usually found it's just a matter of starting with the bolt that goes in the easiest. Get that one started, and it facilitates the next bolt, and so on. If one tries to start with the bolt that goes in the hardest, well, it can produce momentary fits of frustation. :-) And Jim Coleman's suggestion of applying downward force is sometimes necessary in the most stubborn of situations. An easy thing to do with a Phillips screwdriver blade, or whatever. But your suggested method seems to be a very worthy approach also, though requiring some additional work. Keith A. McGavern kam544@ionet.net Registered Piano Technician Oklahoma Chapter 731 Piano Technicians Guild USA
This PTG archive page provided courtesy of Moy Piano Service, LLC